Users Manual Part 2
Setting Up Your Omnipod5 Application 4
70
4 Setting Up Your Omnipod5 Application
additional segments. Repeat steps 1-3 as needed until your nal segment ends
at midnight.
Review the Basal Program
e next screen summarizes the start and
end times, and basal rate for each segment
of the Basal Program.
1. Tap CONTINUE to review your Basal
Program.
2. Check that the graph and the
individual segment values are correct.
e total daily amount of basal insulin
to be delivered by this Basal Program
is listed below the graph.
3. To change an end time or basal rate for
a segment:
a. Tap the row containing the
segment you would like to change.
b. Tap the End Time eld and enter
the new end time for the segment.
c. Tap the Basal Rate eld and enter
the desired basal rate.
d. Tap NEXT.
e. Set the end time and basal rate for
any following segments, as needed.
4. When the Basal Program is correct, tap SAVE.
5. To add a new segment:
a. Tap the row containing the start time of the new segment.
b. Tap the End Time eld and enter the start time of the new segment as the
end time of this segment.
c. Change the basal rate, if necessary.
d. Tap NEXT.
e. Set the end time and basal rate for any following segments, as needed.
6. To delete a segment:
a. Note the end time of the segment you want to delete.
b. Tap the segment before the segment you want to delete.