Users Manual Part 2

69
Setting Up Your Omnipod5 Application 44 Setting Up Your Omnipod5 Application
Create a Basal Program
e next step is to create a Basal Program. For a description of basal rates, basal
segments, and Basal Programs, see "Basal Programs" on page 97.
¾ Tap NEXT on the Create Basal Program description screen to continue.
Name and tag the Basal Program
e default name for the Basal Program is
Basal 1.
1. To change the name, tap the Program
Name eld and enter the new name,
then tap Done.
Optional: To add a visual icon to your
Basal Program, tap one of the tags. Tap
the tag a second time to deselect it.
2. Tap NEXT.
Dene the segments
You can create up to 24 segments within
your midnight to midnight Basal Program.
e Start Time for the rst segment is
always 12:00 AM.
1. Tap the End Time eld and scroll to
select the desired end time.
2. Tap the Basal Rate eld and scroll to
select the basal rate for the segment.
Note: e Maximum Basal Rate that
you entered earlier is displayed under
the Basal Rate text. You cannot enter a
basal rate greater than this number.
Note: e two vertical blue lines on
the graph near the top of the screen
show the start and end time for the
basal segment. e selected basal rate
for the segment is shown between the
two vertical lines.
3. Check the values of your start and
end times and the basal rate. en tap
NEXT.
4. If the Basal Program does not cover
12:00 AM-12:00 AM, you must add