Users Manual Part 1

33
System Terminology and Navigation 22 System Terminology and Navigation
Using a scroll wheel
Tapping an editable eld can bring up a scroll wheel. Place your
nger on the scroll wheel. Swipe up or down to select your desired
value. e faster you move your nger, the faster the wheel will
scroll.
When your desired selection is shown in the center of the wheel,
select the value by tapping it or by tapping outside the scroll wheel.
Using a slider
Use sliders to select a value from a scale. Place your nger
on the small open circle and move your nger until your
desired value is displayed. Move your nger along the
circle to move the slider. Move your nger clockwise
for a larger number and counterclockwise for a smaller
number. Li your nger when the desired value is
displayed.
Selecting, Adding, and Deleting Items
Toggles
Tap a toggle to change the selection from one side to the other.
Toggles allow you to turn a feature ON or OFF. e toggle is on the right
side and purple when a feature is ON, and on the le and gray when a
feature is OFF.
Drop
Add and delete buttons
A plus symbol in a circle indicates that you can add an item to a list. Tap the
plus symbol to add the item to the list.
A red x in a circle indicates that you can remove an item from a list. To
remove the item, tap the red x.