Users Manual

67
Activating and Changing Your Pod 5
1. Tap RECORD POD SITE to bring up the Record Pod Site screen.
2. Tap the FRONT or BACK tab to select an area of your body for your Pod. To
help you avoid recent Pod sites, the screen shows the two most recent dates
that each site was selected.
3. Tap a circle to indicate the location on your body where you will place your
new Pod. A blue dot appears inside the selected circle. Tap again to deselect
the location.
4. Tap the DETAILS tab to add a detail about the placement of this Pod. For
example, you could add a detail that says "Facing up" or "Facing down" to
describe the Pod's orientation.
a. To add a new detail, tap ADD NEW and type in the new detail. Tap ADD
when done. e new detail is added to the list.
b. Select a detail for the new Pod by tapping the circle next to that detail. You
may only add one detail for each Pod. Tap again to deselect the detail.
Note: To delete a site detail, tap the next to the detail.
5. Tap DONE when nished to return to the Change Pod screen.
Starting
Your
OmniPod 5
Effective Date: 22DEC2020, PCO-000267