Use Instructions
244
22 Taking Care of Your Controller and Pod
Water and your controller
e controller is not waterproof. Do not place it in water or leave it near water
where it can accidentally fall in. If it gets wet:
1. Dry the outside of the controller with a clean, lint-free cloth.
Caution: Never use a blow dryer or hot air to dry the controller. Extreme
heat can damage the electronics.
2. Aer the controller has thoroughly air-dried, turn ON the controller to see if
it is working.
3. If the controller is not working, call Customer Care.
Caution: e controller is not waterproof. Do NOT place it in or near water.
Electrical interference
e controller is designed to withstand normal radio interference and
electromagnetic elds, including airport security and cellular phones. However,
as with all wireless communication technology, certain operating conditions can
interrupt communication. For example, electric appliances such as microwave
ovens and electric machinery located in manufacturing environments may cause
interference. In most cases, interruptions are easy to resolve by moving to a new
location (for more information, see "21.10. "Try Again" - Pod Communication
Issues" on page 234).
USB cable
Caution: Only connect a USB cable to your controller when charging the battery.
Never connect a USB cable to the controller for any other reason.
Note: You can use the controller while it is charging.
Caution: When you connect a USB cable to the controller, only use a cable that is
less than or equal to 4 feet (1.2 meters) in length.
Cleaning your controller
Always keep your controller USB port free of debris and liquids. Dirt, dust, and
liquids can impair the functionality of your controller or damage it.
Caution: Do not use solvents to clean your controller. Do not immerse your
controller in water.
Additional
Information
Effective Date: 22DEC2020, PCO-000267