User's Manual

Understanding and Adjusting Basal Rates
27
3
Cancel an active temporary basal preset
1. On the Home screen, use the Up/Down Controller buttons
to choose Suspend/cancel; then press Select.
2. Choose Cancel temp basal, then press Select.
3. Press Confirm to cancel the actively running temporary basal
preset.
Change, rename, or delete a temporary basal preset
1. On the Home screen, use the Up/Down Controller buttons
to choose Settings; then press Select.
2. Choose Presets, then press Select.
3. Choose Temp basal presets, then press Select.
4. Choose a temporary preset from the list, then press Edit.
5. Follow the steps below.
To change a temporary basal preset
1. Choose Edit, then press Select (Figure 3-16).
2. Enter a new rate (or new percent change), for the preset, then
press Next.
3. Enter a new duration for the preset, then press Save.
4. Press Done.
If you suspend insulin delivery while a temp basal is
running, the temp basal will be cancelled when you
resume.
You cannot edit, change, or delete a temporary basal
preset that is actively running.
Figure 3-16