User's Manual

Getting Started

Enter basal settings

1. Choose a maximum basal rate, then press Next. (The default

maximum basal rate is 3 U/hr.)

2. Choose the initial basal rate to use, then press Next.

The initial basal program created with the Setup Wizard is

named basal 1. You can change the name in the Settings >

Basal programs menu (see Chapter 3, Understanding and

Adjusting Basal Rates).

3. Press Done to confirm the basal program shown on the

screen. To add more basal segments to the program, or to

change the rate shown, see Chapter 3, Understanding and

Adjusting Basal Rates.

4. To see the basal program as a list, press List. To return to the

graphic view, press Graph.

5. Press Save to accept the basal program you have set.

6. Choose a temporary basal feature, then press Next. Choose

% to show temporary basal rates as a percent increase or

decrease of your current basal rate. Choose U/hr to show

temporary basal rates in units per hour. Or choose Off to turn

off the temporary basal feature. For details about setting tem-

porary basals, see Chapter 3, Understanding and Adjusting

Basal Rates.

Enter blood glucose sound setting and BG goal

1. To set the sound for the blood glucose meter, choose On or

Off, then press Next.

2. Use the Up/Down Controller buttons to enter the lower

limit for your blood glucose (BG) goal, then press Next.

3. Enter the upper limit for your BG goal, then press Next.

4. Press Save to accept the BG goal.

Set the suggested bolus calculator

1. To set the suggested bolus calculator feature, choose On or

Off, then press Next.

You can add up to 7 basal programs and set 24

segments per program

The lower and upper BG limits are only used when

viewing BG History (see Chapter 8, Record Keeping).

Check with your healthcare provider before adjusting

these settings.

If the suggested bolus calculator is set to On, perform

the following steps. If set to Off, you will be prompted

to “Select bolus increment” and “Enter maximum

bolus.”