User's Manual

Communication Failures
137
11
4. Move across the room or to a different room. Then either:
a. Press Discard to begin the deactivation process.
b. Press Retry to repeat the attempts to communicate with
the Pod. The PDM tries to communicate with the Pod
again. If it cannot communicate, it displays the same
screen as in Figure 11-13, then finally a second “Bolus sta-
tus unknown” screen (Figure 11-14). Press OK to check the
Pod status or press Discard to begin the deactivation pro-
cess.
5. If at any point in this process the PDM can communicate
again with the Pod, you will see Figure 11-15. The message
indicates that your original instruction to cancel the bolus
was successful.
c. Press OK. The PDM displays the screen in Figure 11-16,
showing how much insulin was delivered before the
bolus was canceled.
d. Press OK again to return to the Status screen
Figure 11-14
Figure 11-15 Figure 11-16