User's Manual

Checking Your Blood Glucose
88
7
3. Insert only the top end of the strip into the test strip port, with
the dark colored rectangle going into the meter (Figure 7-17
and Figure 7-18).
Set the blood glucose test strip code
After you insert the strip, the PDM displays a code number
(Figure 7-19). This number must match the code on the side of
the vial.
If you do not start the test within 2 minutes, the PDM
powers off. To restart the PDM, take out the unused strip
and reinsert it, or simply press and hold the Power but-
ton to turn on the PDM.
Figure 7-17 Figure 7-18
Keep the blood glucose test strip vial away from chil-
dren. The cap is a choking hazard. The cap or vial
contains drying agents that may be harmful if inhaled
or swallowed and may cause skin or eye irritation.
Figure 7-19
Bottom
To p