User's Manual

The iXL™ Pump
The remote will alert every 5 minutes until the pump
change process is complete. You must complete the
pump change process within one hour.
Once the soft cannula is inserted and the prime bolus has filled
the cannula, the pump will beep, indicating that it is active and
delivering insulin at the programmed basal rate (Figure 5-16).
2. Press OK to return to the Status screen.
Check Pump Status
To check pump status:
• From the Main menu, press Status. The remote automatically
checks the status of the pump. The remote then displays the
current reservoir volume, basal and bolus rates, and any
alarm conditions. (See Chapter 6, iXL Remote Controller
Features, for details of what you see on the Status screen.)
Suspend Insulin Delivery
Sometimes you may need to briefly stop insulin delivery (for
example, during exercise). The iXL System lets you suspend
insulin delivery for up to 2 hours. While in suspension, the pump
beeps once every 15 minutes, reminding you of the pump’s
suspend status.
At any time during a suspension period, press Resume
to resume the basal program that was running when you
suspended insulin delivery.
iXL™ Diabetes Management System User Guide: The iXL™ Pump 43
5
Figure 5-16