User's Manual

Activate a new pump
1. Remove the new pump from its sterile package.
2. Place the remote against the new pump (Figures 5-6A/5-6B).
3. Press Activate (Figure 5-7).
After you press Activate, the pump beeps, indicating that the
remote has successfully activated the pump. The iXL System
safety features ensure that the remote works only with the
newly activated pump.
38 iXL™ Diabetes Management System User Guide: The iXL™ Pump
The iXL™ Pump5
Figure 5-6A
Figure 5-7
Figure 5-6B