User's Manual

The iXL™ Pump
4. At the message, “Pump deactivated. Remove and discard
the pump, and then press Continue” (Figure 5-4), remove the
old pump.
(a)Lift the edges of the adhesive tape from your skin and
remove the entire pump (Figure 5-5).
(b)Use soap and water to remove any adhesive that remains
on the skin or, if necessary, use an adhesive remover.
(c)Discard used pump according to local waste disposal
regulations.
5. After removing the old pump, press Continue.
iXL™ Diabetes Management System User Guide: The iXL™ Pump 37
5
Figure 5-4
Figure 5-5