User's Manual

Basal Rates
6. Review the temporary basal name and rate; press Save to
accept it.
Or press Back to return to the previous screen and enter a
different rate.
Enable an existing temporary basal preset
1. In the Main menu, use the Up/Down Controller button to
choose Temp basal (Figure 3-15); then press the soft key
labeled Select.
2. Choose the temp basal preset you want to use from the list,
then press Select.
3. Enter the duration for the temporary rate, in increments of 30
minutes, then press Enter.
4. Press Start to begin the temporary basal rate shown on the
screen.
Or press Back to return to the previous screen if you want to
enter a different duration.
Cancel an active temporary basal preset
1. In the Main menu, use the Up/Down Controller button to
choose Suspend/cancel; then press the soft key labeled
Select.
2. Choose Cancel temp basal, then press Select.
3. Press Confirm to cancel the currently running temporary
basal preset.
Or press Back to back out of this process.
Change or delete a temporary basal preset
1. In the Main menu, use the Up/Down Controller button to
choose Settings; then press the soft key labeled Select.
2. Choose Temp basal presets, then press Select.
3. Choose a temporary program from the list, then press Edit.
4. Follow the steps in the next section, then press Done.
iXL™ Diabetes Management System User Guide: Basal Rates 23
3
Figure 3-15