User's Manual

Basal Rates

5. Enter a basal rate for the new segment, then press Enter.

6. To save the newly entered segment into the basal program,

press Save. If you want to make additional edits, press Edit

and repeat steps 3-5.

7. If this is the currently active basal program, press Confirm

(Figure 3-11) to update. (The pump beeps to indicate that the

active basal program has been updated.)

Press Save (Figure 3-12) for any other basal program.

Or, press Cancel to ignore the edits you made to the basal

program and return to the edit screen.

To rename a basal program:

1. After choosing a program from the list, choose Rename and

then press Select.

2. Press the Up/Down Controller button to enter the characters

that spell out the name you want; then press Save.

Or press Back to back out of this process.

To delete a basal program:

1. After choosing a program from the list, choose Delete and

then press Select.

2. Press Delete to permanently delete the program.

Or press Cancel to back out of the deletion process.

As a safety feature, you cannot delete the current basal

program. If you try to delete the current program, the

screen displays an error message (Figure 3-13). Press OK

to return to the list of editing options.

iXL™ Diabetes Management System User Guide: Basal Rates 21

Figure 3-11

Figure 3-12

Figure 3-13