User's Manual

4. Press Enable to start the selected basal program. The pump
beeps to indicate that the chosen basal program is running.
Or press Cancel to return to the list and select a different
program.
A diamond icon (♦) appears next to the program that is
currently running. You cannot select the current program
to enable, because it is already running.
As a safety feature, you cannot enable a new basal
program while a temporary basal preset is in process
(see “Preset Temporary Basal Rates” later in this
chapter); you must first cancel the current temporary
basal preset. If you try to activate a new program before
you cancel the temporary preset, the screen displays an
error message (Figure 3-9). Press OK to return to the list
of available basal programs.
Change or delete a basal program
1. In the Main menu, use the Up/Down Controller button to
choose Settings; then press the soft key labeled Select.
2. Choose Basal programs, then press Select.
3. Choose a program from the list, then press Edit.
4. Follow the steps below, then press Done.
To change a segment or rate in the basal program:
1. Choose Edit segment, then press Select (Figure 3-10).
Or press Done to back out of this process.
2. To edit the program, press Edit.
3. Enter the start time for the segment you want to change then
press Enter.
4. Enter an end time for this segment, then press Enter.
20 iXL™ Diabetes Management System User Guide: Basal Rates
Basal Rates3
Figure 3-9
Figure 3-10