Operation Manual

For more tips, tricks and videos visit, www.myinstyler.com

WhenIusemyInStyler,whydoesthetemperatureLEDstartto

ash?

A. Itisnormalfortheheattouctuateduringuse.Aslongas

theInStylerhasbeenallowedtoreachfullheat(steadyLED)

after powering on, you can continue to use your InStyler

whileitisashing.

HodoIcleanmyInStyler?

A. When cleaning your InStyler, disconnect it from the power

source and make sure it has completely cooled. Wipe the

outside surface only with a soft damp cloth. Be sure to wring

out all excess water before applying it to the InStyler. Clean

more severe dirt by using a soft, damp cloth with a mild

soap. Bristles can be lightly scrubbed if necessary with a

damp cloth to remove any built up product and any residual

hair left in the bristles should be removed. The barrel can

be wiped down with a soft, damp cloth. Use a mild soap if

necessary.MakesuretheInStyleriscompletelydrybefore

plugging into any power source.