VECTOR

8. At the minutes desired, PRESS the [Mode] button to accept the changes and exit the setup program. A small

bell will appear at the bottom left side in Field 2 to signify an alarm has been activated.

The Alarm setup is complete. To activate up to three alarms, please repeat steps 1-8 for the selected alarm

(1,2, or 3).

Note: The Alarm volume can not be changed.

2.3 STOPWATCH SUB MODE

The Wristop Computer stopwatch sub mode can provide split time measurement and two finish times up to

23 hours 59 minutes and 59 seconds.

In the TIME mode, PRESS the [Select] button twice to enter this sub mode.

In the Stopwatch sub mode (Fig. 40):

 Field 1 displays the seconds and tenths of a second,

 Field 2 displays the current time, and

 Field 3 displays hours and minutes and to the far right stopwatch.

2.3.1 How to Use the Stopwatch

There are three timing modes the user can employ:

 an elapsed time measurement;

 a split time measurement; and

 a two finish time measurement.

In the elapsed time mode:

1. PRESS the [+] button to start, stop, and restart the stopwatch in the stopwatch sub mode.

2. PRESS the [-] button to reset the stopwatch to zero once the stopwatch has stopped.

In the split time mode:

1. PRESS the [+] button to start the stopwatch in the stopwatch sub mode.