Poolroom SHOWER DOOR Shower Door Installation Instructions A, A | Reversible For a Left or Right Door | | Please Do Not Return the Product to the Store. | | Contact us with any questions.
Poolroom SHOWER DOOR Model Specific Preparation A REQUIRED: 3/8” (10mm) Out-of-Plumb Adjustment within the Wall Profile; Verify threshold and walls with a level.
Grog SHOWER DOOR PACKAGE CONTENT “Ny, PACKAGE CONTENT PART# | DESCRIPTION QTY || PART# | DESCRIPTION QTY A Bottom Gasket 1 F Magnetic strip 1 Magnetic Seal B Door panel 1 G Aluminum channel ! Cc Wall Jamb 1 H U channel 1 D Top Cover Cap 1 Alu. Threshold 1 E Handle 1 NOTE] Inspect all parts for missing prior to installation! | Ne oo Website: Contact us for any part missing.
Poolroom SHOWER DOOR PACKAGE CONTENT Wall anchor Screw | @6x38mm ST4*30 (washer) ST4*10 | Wood 7 pcs 7 pcs PCs 7 pcs | 1 pcs Inspect all parts for missing prior to installation! "| Contact us for any part missing.
Grog TOOLS REQUIRED SHOWER DOOR Drill Bits Screw Driver Drill Level 3.2/6 dia.
Poolroom SHOWER DOOR SAFETY INFORMATION CAUTION Please carefully read the following important safety information before handling or installing this shower. There is a risk of serious injury while handling this product. To minimize these risks, please note: * Always wear safety glasses and gloves while handling. + Always follow the installation instructions. * Inspect glass for damage before installation.
Grog Model Dimensions SHOWER DOOR A configuration dimensions: Product Height | Model width | Installation width | > (Openings) 30" 30" ~31 3/8" 2519/32" | 9 Ton 32" 32" ~33 3/8" 27 19/32" 3/8" 29 19/32" 3/8" 31 19/32" ees Lge [EG— adjustment 3" MAX adjustment 1" MAX adjustment 17 MAX adjustment § MAX shower head li it shower head NOTE % Left pivot ‘( This model is reversible for right or left-hand Right pivot door installation. The left-hand door installation is shown throughout this manual.
Grog Wall Jamb Installation . NOTE, with a level before marking the 1 _ Wall Jamb Confirm the Wall jamb is plumb location of the holes for drilling. Center the Wall jamb (C) on the Threshold. NOTE | Leave 20mm [25/32"] from edge of shower pan.
Grog SHOWER DOOR Wall Jamb Installation silicone the back of the Wall Profile Website: eo If a Stud is present behind the wall: drill a hole up to the stud, 7 | drill an pilot hole into the stud and NOTE | | use the ST4.0 x 30mm Pan Head Screws (bb) Stud is present behind the wall: drill a @1/4” (6mm) hole and insert the Wall Anchors (aa) and use the ST4.0 x 30mm Pan Head Screws (bb).
Grog Door panel Installation 9 Website: Hotlink ; + 1 302 336 8180 SHOWER DOOR The Door panel Profiles can be adjusted up to 3/8” within the Wall Jamb for overall width or to correct for out-of-plumb conditions within the model size. Screw them together after making final adjustments. See label. Pls follow the arrows to install the glass panel Place wood shimmed) onto the threshold to provide proper spacing beneath the door glass.
Poolroom SHOWER DOOR Magnetic strip Install to door panel Magnetic Seal 2 Aluminum channel v1 U channel $d Keep flush TN 1. Magnetic strip Install to door panel. ‘NOTE | 2. Put F,G,H together before fasten the glass : ’ door,make all these parts keep flush.
Poolroom SHOWER DOOR Fasten the door panel r=" | | After final adjustments, drill @1/8 holes in the Wall Jap (C). Drill only through the first layer of the Door panel Profile and ‘NOTE | | install the ST4.0x10mm Pan Head Screws (dd) using the Decorative Covers and Washers (cc) 1 Drill Bit | | L__~Z EN 0 0 ride Vie Include the washers when installing the ST4.0x10mm NOTE, Pan Head Screws (dd) and Decorative Caps (cc) .
Poolroom SHOWER DOOR Determine the G & H position Pencil Put F,G,H together, keep flush, mark the position on the wall. } Center the Magnetic Seal Aluminum channel(G) =" | and U channel (H) on the Threshold. eo “Website: exbriteusa.
Poolroom SHOWER DOOR U channel Installation eo If a Stud is present behind the wall: drill a hole up to the stud, TTT drill an pilot hole into the stud and / 5 | use the ST4.0 x 30mm Pan Head Screws (bb NOTE | or (bb) Stud is present behind the wall: drill a hole and insert the Wall Anchors (aa) and use the ST4.0 x 30mm Pan Head Screws (bb).
Poolroom SHOWER DOOR Magnetic Seal Wall Jamb Installation ST4X10mm Include the washers when Pan Head Screw installing the ST4.
Grog handle Installation NOTE, and open the door.
Grog Measure "X" and cut the Bottom Gasket same length as "X". Website: SHOWER DOOR Top Cover Cap & Bottom Gasket Installation from pivot profile to magnetic 'NOTE| Pot P seal on the door.
Poolroom SHOWER DOOR Alu. Threshold Installation ass and NOTE | "X" wall to wall width. NOTE | cut the alu threshold NU same length as 27mm [1 1/16 ~~ | The large curved lip of the dam strip is NOTE | | intended to face toward the outside of | the shower to ensure the flow of water is redirected towards the drain.
Poolroom SHOWER DOOR SEALING NOTE | The surfaces need to be clean and free of debris before applying silicone. | 7 i Ensure that the Shower door closes tightly and opens smoothly. NOTE Apply a good quality silicone sealant along the wall Water seal Allow 24 hours for the silicone to cure before using the shower. | Apply Silicone supplied).
Poolroom SHOWER DOOR This troubleshooting guide is for general aid only. For service and installation issues or concerns, please contact us by hotlink + 1 302 336 8180. Troubleshooting Problem/Symptom Suggested Solution Page(s) *Check all shipping/packaging material for missing Missing parts parts/components. *If not found, please contact us by hotlink + 1 302 336 8180 to order factory part replacement. *Check the magnetic seal (F)for proper trimming and installation.
