LED Lighted Medicine Cabinet W e b s it e : Htt p ://w w w. ex b r it e u sa . c o m E m a i l : i nfo @ ex b r it e u s a .
LED Lighted Medicine Cabinet Installation and Operating Manual Series: 13MC2432V4LX Size: W24''xH32'' 13MC2432V4RX For easy and safe installation, please refer to the following: Read all instructions thoroughly before installing the enclosed product. Read and take note of all safety, care and maintenance information. PLEASE KEEP THIS INSTRUCTION MANUAL FOR FUTURE REFERENCE DURING PRODUCT OPERATION AND MAINTENANCE. W e b s it e : Htt p ://w w w. ex b r it e u sa .
LED Lighted Medicine Cabinet INSTALLATION INSTRUCTIONS WARNING AND SAFETY INSTRUCTIONS Before installing your LED Medicine Cabinet fixture,please make sure that you carefully read through this instruction sheet, refer back to them during installation to ensure your product is fitted safely and correctly. Keep these instructions for future use. WARNING Risk of Fire and Electric Shock ●All fittings must be installed in accordance with current IEE wiring regulations.
LED Lighted Medicine Cabinet REQUIRTOOLSED PARTS SUPPLIED Z-Bar x1 Z-Hook x1 Layer board supporting X4 Matching screws x2 for spare 22.2”x3.74”: Glass Shelf x3 Side panels x 2 Wire caps x3 Anchor x6 W e b s it e : Htt p ://w w w. ex b r it e u sa . c o m Round head screw x6 Hinge cover x3 E m a i l : i nfo @ ex b r it e u s a .
LED Lighted Medicine Cabinet Installation Instructions for Hanging Walls Verify minimum clearances 76 [3”] STEP 1 STEP 2 W e b s it e : Htt p ://w w w. ex b r it e u s a . c o m E m a i l : i nfo @ ex b r it e u s a .
LED Lighted Medicine Cabinet Installation Instructions for Hanging Walls Mark hole loca�ons on the wall.Drill holes Insert anchors where needed Secure the bar with round-head screws 6 STEP 3 STEP 4 Align the slots inside of the side panels and cabinet. STEP 5 The side panels and cabinets are individually packaged , you need follow the STEP 5 to STEP 7 to install the side panels for hanging walls version,for embedded installation no need install the side boards. W e b s it e : Htt p ://w w w.
LED Lighted Medicine Cabinet Installation Instructions for Hanging Walls White wire(Neutral) Ground wire Black wire (Hot) 3-connec�on cap STEP 7 W e b s it e : Htt p ://w w w. ex b r it e u sa . c o m E m a i l : i nfo @ ex b r it e u s a .
LED Lighted Medicine Cabinet Installation Instructions for Hanging Walls Install the glass shelf Adjust corresponding screws on the hinge to align the doors, ensure that gaps are even and the doors open and close smoothly Adjust gap between door and cabinet W e b s it e : Htt p ://w w w. ex b r it e u sa . c o m Install the Hinge cover E m a i l : i nfo @ ex b r it e u s a .
LED Lighted Medicine Cabinet Embedded Installation Instructions Determine the size of the opening 105mm(4 1/8”) 795mm(31 1/4”) 595mm(23 1/2 ”) 76mm(3”) STEP 1 White wire(Neutral) Ground wire Black wire (Hot) 3-connec�on cap STEP 2 W e b s it e : Htt p ://w w w. ex b r it e u sa . c o m E m a i l : i nfo @ ex b r it e u s a .
LED Lighted Medicine Cabinet Embedded Installation Instructions STEP 3 STEP 4 STEP 5 * All diagrams are for reference only. All model dimensions and proportions position will vary. W e b s it e : Htt p ://w w w. ex b r it e u sa . c o m E m a i l : i nfo @ ex b r it e u s a .
LED Lighted Medicine Cabinet Bright sensor UL socket with USB 3.6A ON/OFF button Color temperature button ON/OFF button Dimming button Defogger button ON/OFF switch for night light only Night light W e b s it e : H tt p ://w w w. ex b r it e u s a . c o m DO NOT cover the sensor on the cabinet. Night light will be auto-on/off according to the brightness surrounding. Op�onal to stop night light func�on by tapping the ON/OFF switch at the bo�om of the cabinet.
LED Lighted Medicine Cabinet Short press and touch bu�on to turn on/off the mirror. Bu�on turns blue when connected to main supply & turns to white a�er a short press.The mirror starts to work accordingly. Long press bu�on to change color temperature when the mirror is working. Short press and touch bu�on to turn on/off the mirror. Bu�on turns blue when connected to main supply & turns to white a�er a short press.The mirror starts to work accordingly.
