INSTEON Wireless Thermostat 2441ZTH Quick Start Guide
INSTEON Wireless Thermostat Temperature Adjust 72 SET Mode Status LED 72 SET SET Set Button
Battery Compartment 2 AA Batteries 5V SENSOR 5V SENSOR Optional Connections for 5V Power and External Temperature Sensor For the complete Owner’s Manual and more, visit: insteon.
1 Using with a Wired Thermostat On the Wireless Thermostat, press and hold the set button until the device beeps.
2 On the Wired Thermostat, press and hold the set button until the Wired Thermostat double beeps. 72 SET Wireless Thermostat setup complete.
Use ºF or ºC Follow the instructions below to change the temperature mode of your thermostat.
Controlling Millivolt Heaters You can control vintage millivolt heaters with the INSTEON Wireless Thermostat if you replace the mercury float or battery-powered thermostat with an IO Module*. *Wireless Thermostat requires at least one Dual-Band INSTEON device to communicate with IO Module.
Controlling Line Voltage Heaters You can control a line voltage heater with the INSTEON Wireless Thermostat if you replace the line voltage thermostat with an INSTEON Micro Module. Protected under U.S. and foreign patents (see www.insteon.com/patents) ©2014 INSTEON RAW-#### Rev 02.26.
