User Manual
Table Of Contents
- Product Specifications
- IMPORTANT SAFEGUARDS
- Special Cord Set Instructions
- Initial Setup
- Product, Parts and Accessories
- Control Panel
- More Controls
- Display Messages
- Initial Test Run (approximate time: 25 minutes)
- Smart Programs
- Using the Rotisserie Accessories
- To use the Rotisserie Spit and Forks
- Removing the Accessory
- Cooking Timetable
- Cooking Tips
- Care and Cleaning
- Reinstall the Oven Door
- Remove the Oven Door
- Troubleshooting
- Warranty
15
Initial Test Run
8. Part way through the Smart Program, the oven beeps and displays turn Food
to remind you to ip your food items. When cooking with both cooking trays,
swap their positions in the cooking chamber.
Open the glass door to automatically pause the Smart Program, then close the
door to resume.
Note: The turn Food notice only appears when using Air Fry and Roast Smart Programs.
If Rotate is turned on, the message will not appear. Some food items do not need to be
turned. Cooking will resume after 10 seconds whether food has been turned or not.
9. The display counts down the last minute of cooking time in seconds. When the
Smart Program ends, the display indicates End.
Note: If the door is not opened, the oven will remind you that food is ready 5, 30, and
60 minutes after the Smart Program ends.
Follow these basic steps to cook with any Smart Program in the air fryer oven.
CAUTION
The oven will be hot during and after cooking. Do not touch hot surfaces. Always
use proper hand protection to remove cooking trays. Allow the oven to cool to room
temperature, then clean the accessories and cooking chamber. Refer to Care and
Cleaning in this user manual.