User Manual

20 | [e-mail] | [phone] instantpot.co.uk | 21
Status messages
The Pro is in standby mode, ready to make your next favourite
meal.
The multicooker is Pre-heating.
The inner pot has reached the perfect cooking temperature and
food can be added.
Only applies to Sauté and Sous Vide.
The display shows one of the following:
• The remaining Cooking time when a Smart Programme is
running,
• The Delay Start countdown,
• How long food has been in Keep Warm.
The Yogurt Smart Programme is set to pasteurisation mode.
See Cooking: Yogurt for more information.
Displays when you’re setting up Sous Vide cooking to show the
default temperature setting.
To set a custom cooking temperature, turn the dial when the
temperature ashes. Then press the dial to make your selection.
Displays when you press a Fav key to save a Favourite recipe.
Displays when you press a Fav key that hasn’t been saved as
a Favourite. Number will change between 1-5 depending on
the missing Fav setting selected.
When cooking has nished, the display shows End until you
remove the lid or touch Cancel.
Do you see something else? See Troubleshooting for more information.
Settings
Setting Description
Change displayed
temperature (°C and °F).
In standby, press and hold the dial for 5 seconds.
When the temperature unit ashes, turn the dial to toggle
between °C and °F, then press Start to save the change.
Turn sound on or off.
In standby, press and hold the dial for 5 seconds.
When the temperature unit ashes, press the dial to go to
the sound eld.
When the sound icon ashes, turn the dial to toggle the
sound on and off, then press Start to save the change.
Audible safety and error message alerts cannot be turned off.
Adjust and save custom
cooking times and
temperatures.
Changes to the cooking time, temperature and pressure
level are saved once the Smart Programme begins.
See Cooking for more information.
On-the-y changes to
cooking settings.
Once a Smart Programme has started, press the dial to
enter the cooking settings.
Turn the dial to adjust settings, then press the dial to
conrm your changes and go to the next eld.
When you’re happy with the settings, touch Start to
conrm your changes and resume cooking.
Changes made during cooking are not saved to memory.
Delay the start of cooking.
Default time Time range
6 hours
(06:00)
10 minutes to 24 hours
(00:10 to 24:00)
Select and set up an applicable Smart Programme.
After programming the Smart Programme, touch Delay
Start.
When the time ashes, turn the dial to adjust the delay
time as needed.
Touch Start to begin the delay countdown.
Delay Start cannot be used with Sauté, Yogurt, Sous Vide or Steam.
C