User Manual

15


The following procedure is for “Rice”, "Soup", "Poultry", "Meat/
Stew", "Bean/Chili", "Mulgrain", "Porridge", "Steam" and
“Manual” funcons.
1. Follow steps in the "Cooking Preparaon" secon of this
manual.
2. Connect power cord. The LCD display shows “OFF”
indicang that it’s in standby state.
3. Select a cooking funcon, e.g. “Soup”. Once a funcon key
is pressed, its indicator lights up.
 Within 10 seconds aer pressing a funcon key, you
can sll select any other funcon keys and adjust cooking
duraon.
4. Select cooking me.
 You may use the "Adjust" key (except the “Manual” and
“Rice” funcons) to adjust cooking duraon.
Press the "Adjust" key repeatedly to change
between “Normal”, “Less" and “More" modes
which will light up on the display.
 If necessary, change the cooking me with
“+” and “-“. Press and hold the “+” or “-“ key for
faster changes.
 The built-in cooking me is suitable for general purpose food. Please
use the cooking me table in the recipe book to determine the
appropriate cooking me based on the specic food, the quanty of food
and your texture preference.
5. Select cooking pressure.
 All funcons except “Rice” defaults
to High Pressure. For “Rice” funcon, the default is
Low Pressure. Low Pressure operates at half of the
regular working pressure (around 5.8psi or 40kpa). It
is used to avoid overcooking tender food materials
such as vegetables and for certain recipes that may
call for using low pressure seng.
6. Cooking starts automacally in 10 seconds aer the last
key press.
 Three audible beeps will sound to indicate the cooking
process has begun. The LCD display shows "On"
indicang that the pre-heang state is in progress.
Please note: Depending on the food content, the quanty and its temperature (frozen
or not), the preheat cycle can range between 10 to 40 minutes.
 As the pressure increases inside the cooker, it is perfectly normal for traces of steam to
escape from the oat valve unl the oat valve pops up.
 Once the cooker reaches working pressure, the LCD display changes from “On" to the
programmed cooking me. The cooking me counts down to indicate the remaining