User Manual
Table Of Contents
- IMPORTANT SAFEGUARDS
- Special Lead Set Instructions
- Initial Setup
- Product, Parts and Accessories
- Control Panel
- Smart Programme Settings
- Adjust and Save Pressure Cooking Temperature
- Adjust and Save Pressure Cooking Time
- Adjust and Save Non-Pressure Cooking Temperatures
- Adjust and Save Non-Pressure Cooking Time
- Cancel and Standby Mode
- Turn Sound On/Off
- Adjust Temperature Scale: Fahrenheit and Celsius
- Set a Delay Start Timer
- Automatically Keep Food Warm After Cooking
- Reheat Food or Keep Warm for Long Periods
- Reset Smart me to Factory Default Settings
- Status Messages
- Cleaning Before First Use
- Overview of Pressure Control Features
- Cooking with the Duo Plus
- Depressurizing the Cooker (Venting Methods)
- Initial Test Run (Water Test)
- Using Pressure Cooking Smart Programmes
- Pressure Cooking Timetable
- Grain-to-Water Ratios
- Using Non-Pressure Cooking Smart Programmes
- Care and Cleaning
- Troubleshooting
- Warranty
- Contact
45
Using Non-Pressure Cooking Smart Programmes
Sous Vide
Sous Vide cooking brings vacuum-sealed food to a very accurate temperature
and maintains that temperature for a period of time to achieve high quality,
consistently delicious results.
Set the cooking temperature from a range of 25–90°C. You’ll need:
• Tongs
• Thermometer
• Airtight or Vacuum Sealed Food Pouches
• Optional: Vacuum sealer
1. Remove the inner pot from the cooker base.
2. Fill the inner pot with warm water up to — 1/2 line, as indicated on the
inner pot.
3. Insert the inner pot into the cooker base.
4. Secure the power lead to the base power socket at the back of the cooker base.
Ensure the connection is tight.
Connect the power lead to a 220-240 V power source.
The cooker goes to Standby mode and the display indicates OFF.
5. Place and close the lid as described in Pressure Control Features—Pressure
Locking Lid.
Note: The pressure cooking lid is not necessary when cooking sous vide; however, it is
recommended for optimal temperature control.
6. Press the quick release button down until it clicks and locks into the Vent position.
7. Press Sous Vide to select the Sous Vide Smart Programme.
8. Use the − / + buttons to adjust the temperature in increments of 1°C.
9. Press Sous Vide again to toggle to cook time setting.
10. Use the − / + buttons to adjust the cook time.
Note: Cooking time and temperature adjustments are saved to the Smart Programme
when cooking begins.
11. After 10 seconds, the display shows On to indicate that it has begun heating.
12. While the cooker heats, season food as desired. Refer to
Ingredients and
Seasonings.
Separate single servings of food within individual pouches.
Remove air and seal tightly.