User Manual
Table Of Contents
- IMPORTANT SAFEGUARDS
- Special Lead Set Instructions
- Initial Setup
- Product, Parts and Accessories
- Control Panel
- Smart Programme Settings
- Adjust and Save Pressure Cooking Temperature
- Adjust and Save Pressure Cooking Time
- Adjust and Save Non-Pressure Cooking Temperatures
- Adjust and Save Non-Pressure Cooking Time
- Cancel and Standby Mode
- Turn Sound On/Off
- Adjust Temperature Scale: Fahrenheit and Celsius
- Set a Delay Start Timer
- Automatically Keep Food Warm After Cooking
- Reheat Food or Keep Warm for Long Periods
- Reset Smart me to Factory Default Settings
- Status Messages
- Cleaning Before First Use
- Overview of Pressure Control Features
- Cooking with the Duo Plus
- Depressurizing the Cooker (Venting Methods)
- Initial Test Run (Water Test)
- Using Pressure Cooking Smart Programmes
- Pressure Cooking Timetable
- Grain-to-Water Ratios
- Using Non-Pressure Cooking Smart Programmes
- Care and Cleaning
- Troubleshooting
- Warranty
- Contact
22
Overview of Pressure Control Features
Anti-Block Shield
The anti-block shield prevents food particles from coming up through the steam
release pipe, assisting with pressure regulation.
As an integral part of product safety, the anti-block shield must be installed before
use and cleaned frequently.
Remove the Anti-Block Shield
Grip the lid like a steering wheel and use your thumbs to press rmly against the
side of the anti-block shield (pressing towards the side of the lid and up) until it
pops off the prongs underneath.
Install the Anti-Block Shield
Place anti-block shield over prongs and press down until it snaps into position.
Do not attempt to operate the pressure cooker without the anti-block
shield installed.
Remove
Install