User Manual
Table Of Contents
- IMPORTANT SAFEGUARDS
- Special Lead Set Instructions
- Initial Setup
- Product, Parts and Accessories
- Control Panel
- Smart Programme Settings
- Adjust and Save Pressure Cooking Temperature
- Adjust and Save Pressure Cooking Time
- Adjust and Save Non-Pressure Cooking Temperatures
- Adjust and Save Non-Pressure Cooking Time
- Cancel and Standby Mode
- Turn Sound On/Off
- Adjust Temperature Scale: Fahrenheit and Celsius
- Set a Delay Start Timer
- Automatically Keep Food Warm After Cooking
- Reheat Food or Keep Warm for Long Periods
- Reset Smart me to Factory Default Settings
- Status Messages
- Cleaning Before First Use
- Overview of Pressure Control Features
- Cooking with the Duo Plus
- Depressurizing the Cooker (Venting Methods)
- Initial Test Run (Water Test)
- Using Pressure Cooking Smart Programmes
- Pressure Cooking Timetable
- Grain-to-Water Ratios
- Using Non-Pressure Cooking Smart Programmes
- Care and Cleaning
- Troubleshooting
- Warranty
- Contact
16
Smart Programme Settings
Automatically Keep Food Warm After Cooking
The Keep Warm setting turns on automatically after cooking on all Smart
Programmes except Sauté, Sous Vide and Yogurt.
When automatic warming begins, the timer begins counting from 00:00 to
indicate the time passed, up to 10 hours.
To turn automatic warming off, press Keep Warm. The LED above the button
dims to indicate that it is off.
Reheat Food or Keep Warm for Long Periods
When in Standby, select Keep Warm. Press Keep Warm again to cycle through
Less, Normal and More warming temperature levels.
Use the − / + buttons to set a warming timer up to 99 hours and 50 minutes.
Keep Warm begins automatically after 10 seconds.
When Keep Warm completes, the display indicates End.
Reset Smart me to Factory Default Settings
Reset Individual Smart Programmes
With the cooker in Standby mode, press and hold one Smart Programme button
until the cooker returns to Standby and displays OFF.
The Smart Programme’s pressure level, cooking time and temperature are
restored to the factory default setting.
Reset All Smart Programmes
With the cooker in Standby mode, press and hold Cancel until the cooker beeps.
All Smart Programme pressure levels, cooking times and temperatures are
restored to the factory default setting.