Quick Guide

3
11
|
Pressure Cooking
Pressurised
Top
Depressurised
Bottom
Remove & Install Float Valve
The oat valve has 2 positions. It pops up to indicate
when the cooker is pressurised and lowers into the
lid when the cooker isdepressurised.
Remove: Place one nger on the at top of the
oat valve. Turn lid over. Detach silicone cap from
the bottom side of the oat valve. Remove oat
valve from top oflid. Do not discard oat valve or
siliconecap.
The oat valve and silicone cap must be installed
before use to seal in pressurised steam.
Install: Drop oat valve into oat valve hole on top
of lid. Place one nger on the at top of oat valve.
Turn lid over. Attach silicone cap to bottom of oat
valve. Refer to “Venting Methods” in this guide for
information on releasing pressure.
WARNING
While oat valve is up, contents of cooker are pressurised. Do not attempt to remove
lid. Refer to “Venting Methods” section in this guide for information on releasing pressure.
Failure to comply with this instruction could cause injuries or property damage.
See Safety, Maintenance & Warranty for Care, Cleaning & Storage instructions.