User Manual
Table Of Contents
- IMPORTANT SAFEGUARDS
- Special Cord Set Instructions
- Initial Setup
- Product, Parts and Accessories
- Control Panel
- Smart Program Settings
- Reset Smart Programs to Factory Default Settings
- Adjust and Save Custom Temperatures
- Reheat Food or Keep Warm for Long Periods
- Status Messages
- Cleaning Before First Use
- Overview of Pressure Control Features
- Steam Release Valve
- Anti-Block Shield
- Sealing Ring
- Float Valve
- Condensation Collector
- Depressurizing the Cooker (Venting Methods)
- 10-Minute NR
- Initial Test Run (Water Test)
- Smart Programs: Non Air Frying
- Sauté
- Slow Cook
- Sous Vide
- Sous Vide Cooking Guidelines
- Smart Programs: Air Frying
- Bake
- Roast
- Broil
- Dehydrate
- Smart Program Overview
- Cooking Time Chart
- Care and Cleaning
- Troubleshooting
- Warranty
26
Overview of Pressure Control Features
Steam Release Valve
The steam release valve sits loosely on the steam
release pipe. When the cooker releases pressure,
steam ejects from the top of the steam release valve.
The steam release valve is integral to product safety
and necessary for pressure cooking. It must be
installed before use and cleaned regularly.
Remove the Steam Release Valve
Pull steam release valve up and off steam release pipe.
Steam release valve must be installed before use and
cleaned frequently.
Install the Steam Release Valve
Place the steam release valve on the steam release pipe and press down rmly.
The steam release valve sits loosely on the steam release pipe when installed
properly but should remain in place when the lid is turned over.
WARNING
Do not cover or block the steam release valve.
Remove Install