User Manual
Table Of Contents
- IMPORTANT SAFEGUARDS
- Special Cord Set Instructions
- Initial Setup
- Product, Parts and Accessories
- Control Panel
- Smart Program Settings
- Reset Smart Programs to Factory Default Settings
- Adjust and Save Custom Temperatures
- Reheat Food or Keep Warm for Long Periods
- Status Messages
- Cleaning Before First Use
- Overview of Pressure Control Features
- Steam Release Valve
- Anti-Block Shield
- Sealing Ring
- Float Valve
- Condensation Collector
- Depressurizing the Cooker (Venting Methods)
- 10-Minute NR
- Initial Test Run (Water Test)
- Smart Programs: Non Air Frying
- Sauté
- Slow Cook
- Sous Vide
- Sous Vide Cooking Guidelines
- Smart Programs: Air Frying
- Bake
- Roast
- Broil
- Dehydrate
- Smart Program Overview
- Cooking Time Chart
- Care and Cleaning
- Troubleshooting
- Warranty
21
Status Messages
Indicates that the cooker is in Standby mode.
Indicates that the cooker is in Pre-heat mode.
May indicate that the lid is missing, not properly secured,
or that the wrong lid is being used for the Smart Program
selected.
Display timer indicates one of the following:
• When a Smart Program is running, the display timer
counts down to indicate the cooking time remaining in
the Smart Program.
• When Delay Start is running, the display timer counts
down until the Smart Program begins.
• When Keep Warm is running, the display timer counts
up to indicate how long food has been warming.
Indicates that the Sauté Smart Program has reached cooking
temperature and food may be added to the inner pot.
Indicates that a Smart Program has ended and Keep Warm
is off.
Indicates overheating in the cooking chamber.
Refer to Troubleshooting.
Indicates that an error has occurred. Refer to Troubleshooting.