User Manual

20
Smart Program Settings
Reheat Food or Keep Warm for Long Periods
Keep Warm may be set from a minimum of 10 minutes to a maximum of 24 hours.
1. When in Standby, select Keep Warm.
2. Press Keep Warm again to cycle through Lo (Low) and Hi (High) temperature
levels.
3. Use the − / + Time buttons to set a warming timer.
4. Press Start to begin.
5. When Keep Warm completes, the display indicates End.
Adjust and Save Custom Temperatures
Applicable to Sous Vide, Air Fry, Roast, Bake, Broil and Dehydrate Smart Programs.
1. Select an applicable Smart Program.
2. Use the − / + Temp buttons to adjust the temperature in ºF or ºC.
3. Press Start to start the program and save the temperature.
The next time the Smart Program is selected, the new temperature is displayed.
When air frying, the cooking temperature may be adjusted at any time with the
− / + Temp buttons. Adjustments made after cooking begins are not saved.
Reset Smart Programs to Factory Default Settings
Reset Individual Smart Program
With the cooker in Standby mode, press and hold one Smart Program button until
the cooker returns to Standby, it will beep and display OFF.
The Smart Program’s pressure level, cooking time and temperature are restored to
the factory default setting.
Reset All Smart Programs
With the cooker in Standby mode, press and hold Cancel until the cooker beeps.
All Smart Program pressure levels, cooking times and temperatures are restored
to the factory default setting.