User Manual
Table Of Contents
- IMPORTANT SAFEGUARDS
- Special Cord Set Instructions
- Initial Setup
- Product, Parts and Accessories
- Control Panel
- Smart Program Settings
- Reset Smart Programs to Factory Default Settings
- Adjust and Save Custom Temperatures
- Reheat Food or Keep Warm for Long Periods
- Status Messages
- Cleaning Before First Use
- Overview of Pressure Control Features
- Steam Release Valve
- Anti-Block Shield
- Sealing Ring
- Float Valve
- Condensation Collector
- Depressurizing the Cooker (Venting Methods)
- 10-Minute NR
- Initial Test Run (Water Test)
- Smart Programs: Non Air Frying
- Sauté
- Slow Cook
- Sous Vide
- Sous Vide Cooking Guidelines
- Smart Programs: Air Frying
- Bake
- Roast
- Broil
- Dehydrate
- Smart Program Overview
- Cooking Time Chart
- Care and Cleaning
- Troubleshooting
- Warranty
19
Smart Program Settings
Cancel and Standby Mode
Press Cancel to stop a Smart Program at any time. The display returns to Standby
mode and indicates OFF.
Turn Sound On/Off
When in Standby mode, press and hold + over Time until the display indicates
S On (sound on) or SOFF (sound off).
Note: Error alerts cannot be silenced.
Adjust Temperature Scale: ºF or ºC
When in Standby mode, press and hold + above Temp until the display indicates
ºF (Fahrenheit) or ºC (Celsius). The temperature is displayed in the unit indicated.
Set a Delay Start Timer
Delay Start may be applied to the Pressure Cook, Slow Cook and Steam Smart
Programs.
Set Delay Start for a minimum of 10 minutes to a maximum of 24 hours.
1. Select a Smart Program and adjust the settings as you desire, then press
Delay Start.
Note: Once Delay Start has been selected, there is no way to return to the cooking
settings. To adjust Smart Program settings, press Cancel and enter new selections.
2. When the timer ashes, use the + / − Time buttons to adjust the delay time.
E.g., 02:00 indicates that cooking will start after 2 hours.
3. Press Delay Start again to toggle to the minutes eld and follow the same
process as the previous step.
4. Press Start to begin.
The timer begins counting down.
5. When Delay Start reaches 00:00 the Smart Program begins.
The display indicates On and the cooker starts to Pre-heat.
Automatically Keep Food Warm After Cooking
Keep Warm is on by default on the Pressure Cook, Slow Cook and Steam Smart
Programs.
To turn automatic warming off, select an applicable Smart Program then press
Keep Warm. The LED indicator dims to indicate that the setting is off.