Quick Start Guide

11
Pressure Cooking |
3
Remove & Install Float Valve
The oat valve has 2 positions. It pops up
to indicate when the cooker is pressurized
and lowers into the lid when the cooker
isdepressurized.
Remove: Place one nger on the at top of the
oat valve. Turn lid over. Detach silicone cap from
the bottom side of the oat valve. Remove oat
valve from top oflid. Do not discard oat valve or
siliconecap.
The oat valve and silicone cap must be installed
before use to seal in pressurized steam.
Install: Drop oat valve into oat valve hole on
top of lid. Place one nger on the at top of oat
valve. Turn lid over. Attach silicone cap to bottom
of oat valve. Refer to “Venting Methods” in this
guide for information on releasing pressure.
WARNING
While oat valve is up, contents of cooker are pressurized. Do not attempt to remove lid. Refer to “Venting Methods” section in
this guide for information on releasing pressure. Failure to comply with this instruction could cause injuries or property damage.
Pressurized
Top
Depressurized
Bottom