Use and Care Manual

instanthome.com | 33
Care, cleaning and storage
Anti-block shield
Remove the anti-block shield
Grip the lid like a steering wheel and use
your thumbs to press rmly against the
side of the anti-block shield (pressing
towards the side of the lid and up) until it
pops off the prongs underneath.
Install the anti-block shield
Place the anti-block shield over the prongs
and press down until it snaps into position.
Do not attempt to operate the pressure
cooker without the anti-block shield
installed.
Float valve and silicone cap
Remove the float valve from the lid
Place one nger on the at top of oat
valve, then turn the lid over. Detach the
silicone cap from the bottom side of the
oat valve.
Remove the oat valve from the top of the
lid. Do not discard the oat valve or
silicone cap.
Install the float valve
Drop the narrow end of the oat valve into
the oat valve hole on the top of the lid.
Place one nger on the at top of the oat
valve, then turn the lid over. Firmly attach
the silicone cap to the bottom of the
oat valve.
Do not attempt to operate the pressure
cooker without the oat valve and/or
silicone cap properly installed in the
pressure cooking lid.
Top
Bottom