How to Guide

5
Environmental Conditions
Mechanical properties and Environmental performance
Item
Units
Specified values
Tensile strength (Long-term)
N
Up to150
Crush resistance (Long-term)
N/100mm
300
Minimum bending radius (dynamic)
mm
20D*
Minimum bending radius (static)
mm
10D*
*D = the diameter of the cable body, in this case it is 4.5mm
CROSS SECTION
Construction:
Hybrid cable, fiber (high speed data) & copper (low speed signals)
Cable construction:
4 fiber cores and 7 cooper conductors
Cable jacket: PVC, diameter ~4.5mm
Connector dimensions ~39x20x9mm.
Connector material: Zinc-Alloy
OPERATION AND CONNECTION DIAGRAM
ATTENTION
The Install Bay HDMI AOC is designed for use with the +5V passive power, supplied through
pin 18 on the HDMI connection from the source device. This +5V connection, as well as
powering the internal fiber optic module, is also carried through to the other sink via a full
standard copper connection. Please make sure, that the source device is capable of
delivering more than 500mA.
This cable can only be used in one direction. The connectors are marked with “Source” and
“Display”. Each connector must be plugged into the correct port to avoid signal loss.
Before using this cable, please make sure that all devices which will be connected with the
Operating Temperature
-10-50 °C / 14 – 122 °F
Storage Temperature
-20-60 °C / -4 – 140 °F
Relative Humidity
10-80 %RH
copper!
fiber!
semi-tighted!
sheath!
aramid!yarns!
insulating!layer!
Jacket!