How to Guide

Install Bay HDMI Hybrid AOC cable

INTRODUCTION

Thank you for purchasing the Install Bay Fiber Optic HDMI AOC Cable.

This Cable allows you to transmit HDMI signals to a distance of up to 100m without external

power supply. This cable is a hybrid cable containing both fiber optic and copper cores.

Our HDMI Active Hybrid Cable is the most competitive long distance HDMI interconnection

solution on the market. It supports a maximum data rate of 6Gbps per channel, total 18Gbps,

light weight, flexible, and has an ultra-small fixed installation bending radius of 45mm.

With our advanced optical engine embedded the HDMI Hybrid Cable provides full HDMI

signal integrity.

INTENDED USE

This product is intended for indoor use only. Do not use it outdoors. Contact with moisture,

e.g. in bathrooms, must be avoided under all circumstances.

For safety and approval purposes (CE), you must not rebuild and/or modify this product. If

you use the product for purposes other than those described above, the product may be

damaged. In addition, improper use can cause hazards such as short circuiting, fire, electric

shock etc.

Read the instructions carefully and keep them. Make this product available to third parties

only together with its operating instructions.

SAFETY INSTRUCTIONS

Read the operating instructions carefully and especially observe the safety information. If

you do not follow the safety instructions and information on proper handling in this manual,

we assume no liability for any resulting personal injury or damage to property. Such cases

will invalidate the warranty/guarantee.

The device is not a toy. Keep it out of the reach of children and pets.

The maximum pulling tensile load of the cable is 150N (15kg). Never pull the cable with

higher load.