User Manual

S60M
User Manual
Positioning the S60M
The height of the S60M is 62mm and is ideal for mounting underneath a TV.
| What’s in the box
| Remote control instructions
| Reading the display
| Basic Operation
| Appendix A. Technical specifications
Size
Power Output
Signal input sensitivity
Input voyage
SNR
Port
Frequency
Weight
L890m*W95mm*H62mm
RMS 30W X2(THD+N=10%,1KHz)
High pitch:0.75”X2/4Ω，Full range sound:3”X2/8Ω，
Low frequency radiator:120X60mm X2
400±100mV
AC 110V-240V/50-60Hz
≦70dB
BT,Coaxial,Optical,Auxiliary port(3.5mm),USB
20Hz-20KHz
2.75Kg
Drive Unit
All safety and operation instructions should be read thoroughly before proceeding and please
keep the handbook for future reference.
①
②
③
④
⑤
⑥
⑦
⑧
*
Power button / standby button
Multi-function button
Previous song:Press the button.Next song:Press the button
Volume up/down: VOL+/VOL-
Pause/Mute:In the playback state,press this button to pause
playback once,press again to resume playback.
Function keys in BT mode (short press the “BT” button to pairing;
long press to remove the previously paired device and enter
pairing mode)
Function key in USB mode (USB support format: MP3/WMA/WAV)
Fiber input mode switching
Function key in sound mode
AUX (3.5mm) audio input mode switching
Coaxial input mode switching
Attention:Remote distance:≥8M（replace the batteries if the
control distance reduces）
Optical Cable x 1 Audio Cable x 1 Power Adapter x 1 User Manual x 1Remote control x 1
Sound bar S60M x 1
| Automatic standby Mode
After the customer successfully connects the S60M through one of the AUX/OTC/COX modes, the auto power on/auto
standby function will be activated automatically. After the auto power on/auto standby function is activated, the
S60M will automatically start to recognize the signal input status:
1) Automatic standby: When the device has no signal input for 15 minutes (such as TV shutdown, movie pause, music
pause, etc.), S60M will automatically stand by.
2) Auto power on: When the S60M will automatically stand by, if the S60M detects the signal (TV on, movie replay,
music replay), it will automatically power on within 30 seconds.
3) In the state of automatic power on/auto standby function, the customer can also remotely control through the
remote control and S60M machine panel buttons.
4) The auto power on/auto standby function is the default and cannot be turned off.
5）This function can be controlled by the customer. Long press and hold OPT to turn on,long press pause/mute
button to turn off.
Volume: The volume level can be set between 0 and 30.
EQ modes: Short press EQ button to switch the current EQ mode.
EQ modes:
1）Music mode:Low, medium and high sounds are balanced, reflecting a wider sound zone, suitable for listening to
songs.
2）News mode:Prominent vocals, mainly in the mid-high range, the bass will automatically decay.
3）Movie mode:The treble and bass areas are enhanced, and the gain is unchanged before the midrange is saved.
The default settingis Music mode.
Power on/Power off:Touch the icon for 3s.
Touch the button and the “BT/AUX/OPT/COX/USB” icons will light up if the corresponding audio source is connected.
| Functional description
① Power port
② Optical port
③ Coaxial port
④ Auxiliary port
⑤ USB port
⑥ Bass extension port
*
*
USB port: Automatically identifies and plays tracks from a storage
device.When there is a USB connection, the “USB”.
Wireless bass extension port: Connects to subwoofer to create 2.1
sound system. Need to buy it yourself!
Size:140*90mm
C070303024
K
Ports
| Wired connection
There are two ways to connect the S60M and the audio source: Optical port and Coaxial port. Select one according
to the device you are trying to connect.
COA wiring method:Connect the device to the S60M with a coaxial cable, or replace it with two in one audio cables.
OPT wiring method:Connect the device with fiber optical cable and S60M.
USB playback:Plug in the USB flash drive and start playing from the first song. Note: Cannot select folder to play.
AUX playback:What sound is plugged in, what sound will be played.
USB HDMI R L 3.5mm AV Video COX OPT
①
②
③
Notes:
1.If you can find or pair to the S60M via BT,unplug the S60M from the power outlet, then 5 seconds later plug it back
in and try to connect by following the instructions above.
2.A previously paired device will automatically reconnect if it hasn’t been unpaired.
3.The S60M can only pair to one device at a time. If you cannot pair your device, please check that no other device is
already paired with the S60M.
4.BT connection range:Surrounding objects can block BT signals;for optimal playback,maintain a clear line of sight
between the XXX and the paired device,Household appliances, such as smart air cleaners,WIFI routers, induction
cookers,and microwave ovens can also cause radio interference that reduces or prevent pairing.
| BT wireless connection
1.Enter pairing mode:Turn on the S60M. Press the button on the remote control, the “BT”icon will flash slowly on the
screen indicating the S60M has entered pairing mode.
2.Connect your device:Search for “S60M” on your BT device and then pair to the S60M.The BT icon will illuminate,and
the S60M will make an audible beep to indicate the connection is complete.
3.Long press BT button, all previous BT connections will be disconnected, BT logo on screen will flash, click BT device
list to connect S60M.