INSTABILITY MATERIAL SAFETY DATA SHEET Instabind™ Outdoor Marine Binding Style Instabind™ , by Bond Products ™, is a truly miraculous solution to rug finishing. Now, you can finish your carpet on-site and bind around inside/outside corners and circles with ease.
INSTABILITY I. IDENTIFICATION a. 413-30 Adhesive transfer tape b, Scrim reinforced, double-sided tape li. PHYSICAL DATA a. Solubility in water: Negligible b, Volatility at 100° &1 Less than 0.1% fil. HAZARDOUS INGREDIENTS a. None V. FIRE AND EXPLOSION HAZARD DATA a. Flash point: N/A b. Flammable limits: N/A c. Extinguishing media: Water, dry chemicals, foam, CO, d. Unusual fire hazards:Produces dense black smoke if boomed V. HEALTH HAZARD DATA a.
2B INSTABILITY POLY TAPE MADS SHEET L. IDENTIFICATION a, 100% Polyester . HAZARDOUS INGREDIENTS Chemical name CAS Number % a. Acetic Acid 64-19-7 1 b. Propagandist N/A 0.1 ¢. Caustic (Sodium hydroxide) 1310-73-2 1 d. Epicurean 62-56-6 0.1 e. Monocotyledon Ether N/A 0.1 f. Formaldehyde 50-00-0 0.1 At PHYSICAL DATA a. Form and color: Fabric b. Specific Gravity: 1.34 ¢. Melting point: Approx. 480° F d. Boiling point: N/A e. Solubility in water: N/A IV. FIRE AND EXPLOSION HAZARD DATA a. Ordinary combustible b.
3C INSTABILITY GLUE MDSE SHEET I IDENTIFICATION a. Product Name: b. Predict description: Diner acid based poly amide resin ¢. Poly amide resin d. CAIRN: 68139-80-0 #l. COMPOSITION INFO a. This product doesn’t contain any hazardous chemical as defined by the ZOSMA Hazard Communication Standard (29 CFR 1810.1200 . HAZARDS IDENTIFICATION a. Static electricity may be created when handling b. Use proper grounding methods when using near flammable or explosive materials ¢. Mated resins will cause burns d.
4D STABBING POLYESTER WADDING MADS SHEET I IDENTIFICATION a. 8/32" Perplex F2 Il. PHYSICAL DATA a. Polyester yam b. Ply bleached wadding Hl. MANUFACTURING PROCESS a. Wadding braided together b. Secured by polyester yarn ¢. Ends welded and secured by plastic plug IV, SAFETY a, Non-hazardous b. Non-reactive ¢. Use water, dry chemicals, or dry powder to put out any fires Date of issue: March 21, 2013 Prepared by: Brian Milne President Bond Products, Inc. 4511 Wayne Ave.
