Quick Start Guide

❶
The first time you connect GO to your phone via the Charge Case, open the app and
follow the on-screen instructions to activate the camera.
❷
While connected to your phone via the Charge Case, you can download photos
and videos, and review your content.
Connect to iPhone Connect to Android Phone
4 Connect to Charge Case & Activate
5 Standalone Use
Basic Functions
❶
QuickCapture: Tap the Action Button once when GO is powered off to activate your
QuickCapture function.
By default, this function will record a 15-second video. The start of a recording is
indicated with a short vibration, followed by a flashing cyan light. A long vibration
indicates the end of the recording, after which GO will power off automatically.
Press and hold the Action Button to power on GO, indicated with two short vibrations;
Press and hold the Action Button for 3 seconds to power off;
Press and hold the Action Button for 20 seconds to reset GO.
Power On / Off + Reset
Note: If GO stays in standby mode for over 30 seconds, it will power off automatically.
GO has four basic Action Button prompts, which can be customized to your
preference in the app.