User manual

2.3 Charging and Power Use power adapter of iPhone6/6s/7 series(5V/1A),and connect to the Micro
USB charging port to charge Insta360 Nano,When fully charged,the red light goes off. Connect Insta360
Nano to iPhone as shown to start the camera(*Note:connecting to your iPhone while charging will not
start the camera),The camera will enter the standby mode when the blue indicator light turns green.
The camera will be automatically turned off when unplugged from iPhone. 2.4 Reset If the camera
becomes unresponsive,you can use an eject pin to poke the reset pinhole,or long press the power
button over 15 seconds to reset the camera.The indicator light will go off if successfully reset.