USER MANUAL – EN IN 7562 Motorized Treadmill inSPORTline Zidaho (QS8480C) 1
CONTENTS TIPS FOR SAFETY................................................................................................................................................ 3 SPECIAL TIPS FOR SAFETY........................................................................................................................... 4 PACKING DETAILS ............................................................................................................................................. 4 EXPLODED VIEW ..................
Special tips: Before installation and operation, please read this operation manual carefully and save this manual for future reference. WARRANTY We make sure that this item is made of high quality materials. In normal use, if any problem, we will take charge of maintenance. The warranty time for this item is 1 year (From the day you buy it). If any quality problem about this item, please contact with our services within 1 year. Don’t deal with quality problem by yourself without any authorization.
Please use the spare parts from us, it is not acceptable if you use spare parts from others. This machine is HC level, max weight shall be less than 120 kg. Please consult your doctor at first before running, if you have one of the following diseases. 1. Cardiopathy, hypertension, sugar diabetes, respiratory disease, smoking, and other chronic diseases, complication disease. 2. If you are over 35 years old and heavier than common weight. 3. Women in pregnant or in breasting period.
Umbrella-type allen screw M8*20, Umbrella-type allen screw M8*60, Umbrella-type cross tapping screw M4.
EXPLODED VIEW These are all the components used in installation. All components are listed in the following form. PARTS LIST No.
12 Back roller 1 13 Incline motor 1 14 Motor 1 15 PCB 1 16 Power switch 1 17 Overload protector 1 18 Running board 1 19 Running belt 1 20 Multislot belt 1 21 Long bumper 2 22 Bumper 4 23 Locating pad for side rail 8 24 Motor cover 1 25 Side rail 2 26 Left back cover 1 27 Right back cover 1 28 Rubber transport wheel 2 29 Lower cover of motor 1 30 Adjusting pad 2 31 Transporting wheel set at base 2 32 Left decorative cover at base 1 33 Right deco
50 Speed reed pipe sensor wire 1 51 Upper communication line 1 52 Middle communication line 1 53 Lower communication line 1 54 Green connecting line 1 55 Red connecting line 1 56 Power wire 1 57 Red connecting line 1 TREADMILL STRUCTURE 8
ASSEMBLY STEP 1: Set meter stator on upper cover of meter Set meter stator on upper cover of meter. Use 4 pcs of Screw ST4.2*15 to solid meter stator. (Fasten screws). STEP 2: Put meter board on meter stator a) Make sure that communication lines and connecting lines are connected correctly, in case they are connected in reverse. b) Put meter board on meter stator, use 4 pcs of Screw ST4.2*15 to solid meter board.
STEP 3: Set meter tube at base frame Set meter tube at base frame, use 2 pcs of Screw M8*20 and 2 pcs of washer, 2 pcs of Screw M8*60, 2 pcs of washer and 2 pcs of nut to solid the meter tube (Don’t fasten screw at first) STEP 4: Put meter on the meter tube a) Make sure that communication lines are connected correctly, in case they are connected in reverse. b) Put meter on the meter tube. Use 6 pcs of Screw M8*20 with 6 pcs of washer to solid the meter.
STEP 5: Install decorating cover at base Use 6 pcs of Screw ST4.2*15 to solid left and right decorating cover at base. Step 6: Disassemble connecting screw for base frame USE Insert the power plug into the socket and switch on the machine. The switch light will be on and you will hear a voice “Di”. You will find the meter light will also be on. SAFETY KEY The machine can work only when you put safety key at the appointed position.
FOLDING / UNFOLDING Folding: Folding will help to save space. Before folding, please switch off and pull off the plug. Use your hand to lift the running board until it has been locked. Unfolding: Step on the supporting tube and pull running board with your hands. The running board will fall to the ground slowly.
INSTRUCTION FOR CONSOLE Tech info: Time 00:00-99:59 Min Speed 0.0-20.0 km/h Incline 0-20 % Distance 0.00-99.9 km Calorie 0-999 KCAL Heart rate 40-250 / Min Program P1-P99, U1-U3, BODYFAT PANEL KEYS AND FUNCTIONS START Key: Press "Start" Key, there will be 3 seconds countdown displayed on the window! After countdown, the machine will run at the speed of 1.0km/h.
STOP Key: Under running condition, press “stop” key, it will slow down then stop. Reset: Press "Stop" Key for a long time, the machine will be reset and start for new exercise record when you press "Start ". PROG. Key Under ready condition, Press "PROG.", you could select program P1-P99, U1-U3 and BODY FAT. P1-P99 is preset program, U1-U3 is user-defined program, BODY FAT is body fat test. When you finished selecting, you have to press “ start ”to start it ! MODE Key Under ready condition, Press "MODE.
Music Voice + - key You could use these two keys to change the voice of music. Music Select key You could use these two keys to select next or last music.
PROGRAMS QUICK START (FOR MANUAL MODE) Turn on power switch, Put safe key in the right position. Press “START” Key, there will be 3 seconds countdown displayed on the window! After countdown, the machine will run at the speed of 1.0km/h. According to your needs, you could use “SPEED+”, “SPEED-” to change speed, use “INCLINE△”, “INCLINE▽” to change incline. When you put your hands on the handlebar’s heart pulse for 5-8 seconds, it will display heart rate on the screen.
Time (minute:second) 5:00-99:00 0:00－99:59 Incline (%) 0-20 0-20 Speed (KM/H) 1.0-20 1.0-20 Distance (KM) 0.5-99.5 0.00－99.9 Heart rate (time/minute) N/A 40-250 Calorie (cal) 10-995 0－999 BODY FAT TEST Under ready condition, press “PROG.” Key continuously to come into BODYFAT. Press “MODE” key, you could find “F-1-SEX”,”F-2-AGE”,”F-3-HEIGHT”,”F-4-WEIGHT”,”P”-BODYFAT” displayed on the window. Press “SPEED+”, “SPEED-” to set. After setting, press “MODE” to come into “BODYFAT”.
Adjustment running belt: a) Turn the speed to be 6km/h. for running b) Turn the both tension screws located at the end of the treadmill on the right and left sides, half a turn clockwise using the Allen key. (Diagram1 and Diagram 2) c) After adjustment, running belt still slips; please repeat the steps as above. Tighten the running belt (Diagram 1) Loosen the running belt (Diagram 2) The adjustment steps for running belt deflection: The running belt will be deflected more or less under using.
CLEANING a) Please power off and pull the plug out before cleaning. b) Wipe out the dust stuck on the surface and running board frequently. c) Please clean the surface of frame and running belt with a soft cloth dipped with suds, don’t use things like eradicator and naphtha.(After cleaning, please dry it for use) d) Please take the protecting cover off every two month, use vacuum dust-collector to suck the dust remaining inside of the protecting cover.
Disturbed by electromagnetism Stay away from electromagnetism 4 Incline doesn’t work The motor wire is not well connected Open the motor cover and reconnect it 5 Running belt runs faster or slower than what has been displayed Unadjusted Readjust it 6 Running belt slips Running belt is not tight enough Please read “Maintenance: The adjustment steps for poly V-belt / Adjustment running belt“ 7 Running belt is deflected The running belt is unadjusted.
TERMS AND CONDITIONS OF WARRANTY, WARRANTY CLAIMS General Conditions of Warranty and Definition of Terms All Warranty Conditions stated hereunder determine Warranty Coverage and Warranty Claim Procedure. Conditions of Warranty and Warranty Claims are governed by Act No. 40/1964 Coll. Civil Code, Act No. 513/1991 Coll., Commercial Code, and Act No. 634/1992 Coll., Consumer Protection Act, as amended, also in cases that are not specified by these Warranty rules. The seller is SEVEN SPORT s.r.o.
require a compensation for all the costs arising from the repair. The cost shall be calculated according to the valid price list of services and transport costs. If the Seller finds out (by testing) that the product is not damaged, the Warranty Claim is not accepted. The Seller reserves the right to claim a compensation for costs arising from the false Warranty Claim.
