User Manual

4
1. Screw
2. Cooling ventilation
3. Metal rim
USE
Make sure the battery is charged before using it for the first time. If necessary, fully charge the battery.
Battery charging time is approx. 2.5 hours. Hold down the power button for 5 seconds to start.
1. The device starts in vibration and heating mode. You can adjust the temperature with the
LEVEL button. You can adjust the LED photonic light using the LED button. For the first
function mode, the operating time is set to 5 min. MODE 1.
2. Press the power button to select cool mode. The device will vibrate and cooldown. Use the
LEVEL button to adjust the temperature. The operating time is 2 minutes, after switching off
the fan is in operation for another 2 minutes. MODE 2.
3. Use the power button to select EMS lifting mode. The device starts to vibrate and produce an
EMS micro current. Use the LEVEL button to adjust the EMS stream production. Operating
time is 5 min. MODE 3.
4. Use the power button to select moisturizing mode. The device starts vibrating, starts heating
and produces an EMS micro current. You can adjust the EMS current strength with the LEVEL
button. Operating time is 5 min. MODE 4.
5. Press the power button to select the collagen synthesis mode. The device will vibrate, cool
and produce an EMS micro current. You can adjust the EMS current strength with the LEVEL
button. Operating time is 2 min. MODE 5.