Installation & Assembly

Page 2
KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE
For questions, missing parts or defectives, please contact Peak Season at 1-866-563-1732 or [e-mail]
Step 3. Place the table top (K) upside down on a flat, soft, non-abrasive
surface. Connect the table top frame (J) to the table top (K) by using: spring
lock washer (G), 40MM screw (F), hex wrench (I). Do NOT tighten the screws
until all have been inserted. Once all screws have been inserted, securely
tighten each of the screws using the hex wrench (I). At least 2 persons
should very carefully lift the table in unison to turn it right side up. See
Figure 3.
Step 2. Connect the table top frame (J) to the table legs (A & B) by using:
washer (H), spring lock washer (G), 35MM screw (E), hex wrench (I). Please
note that the cross bracing of the table top frame should be at the top of
the frame. See Figure 2a. Do NOT tighten the screws until all have been
inserted. Once all screws have been inserted, securely tighten each of the
screws using the hex wrench (I). See Figure 2b.
Figure 3
Figure 2a
Figure 2b
Assembly Instructions Classic 40” Dining Table