Installation & Assembly

ManualsBrandsInspired Visions ManualsFour Person Patio Dining SetsPanama 6 Piece Sunbrella Dining Set with Cushions

Thank you for purchasing this quality product. Be sure to check all packing materials carefully for small parts that may have come loose inside the carton during

shipment. Please read all instructions carefully before starting the assembly process. Perform all assembly steps on a flat, soft, non-abrasive surface. Do not

over-tighten the screws. CAUTION: Some items and/or the components are cumbersome and heavy. Therefore, the assistance of one or more people is

recommended in order to prevent personal injury and insure that the item and/or its components are not damaged during the assembly process.

Step I. Connect table legs 1 (A) and table legs 2 (B) by using plastic washer (D), 45MM

screw (C) and wrench (I). See Figure 1.

Page 1

KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE

For questions, missing parts or defectives, please contact Peak Season at 1-866-563-1732 or customerservice@peakseasoninc.net

Figure 1

Assembly Instructions Classic 40” Dining Table

Summary of content (2 pages)

PAGE 1
Page 1 Assembly Instructions Classic 40” Dining Table Thank you for purchasing this quality product. Be sure to check all packing materials carefully for small parts that may have come loose inside the carton during shipment. Please read all instructions carefully before starting the assembly process. Perform all assembly steps on a flat, soft, non-abrasive surface. Do not over-tighten the screws. CAUTION: Some items and/or the components are cumbersome and heavy.
PAGE 2
Page 2 Assembly Instructions Step 2. Connect the table top frame (J) to the table legs (A & B) by using: washer (H), spring lock washer (G), 35MM screw (E), hex wrench (I). Please note that the cross bracing of the table top frame should be at the top of the frame. See Figure 2a. Do NOT tighten the screws until all have been inserted. Once all screws have been inserted, securely tighten each of the screws using the hex wrench (I). See Figure 2b. Figure 2a Classic 40” Dining Table Step 3.