WiScope QUICK START GUIDE Model: WS1 LED UP LED DOWN POWER / PHOTO POWER STATUS CONNECTION STATUS SWITCH IMAGER ZOOM
Download and Launch the App 1. Before you begin, plug your WiScope in to a wall charger or charge for 30 minutes 2. Go to the Google Play / Apple / Windows store and search "Inspectron" 3. Download App, Launch App, select "Setup WiScope / Change communication mode", and follow the connection instructions.
General Safety Information Read and understand all instructions. Failure to follow all instructions listed below may result in electric shock, fire, and/or personal injury. SAVE THESE INSTRUCTIONS! Work Area Safety • Keep your work area clean and well lit. Cluttered benches and dark areas may cause accidents. • Do not operate electrical devices or video scope tool in explosive atmospheres, such as in the presence of flammable liquids, gases, or heavy dust.
Video Scope Use and Care • Use video scope only as directed. • Do not immerse the handheld display unit in water. Store in a dry place. • Do not use the scope if condensation forms inside the lens. Let the water evaporate before using again. • Do not use tool if ON/OFF switch is not properly working. Any tool that cannot be controlled with the switch is dangerous and must be repaired.
Warning Information to be included in a separate information sheet included in the product. Specific Safety Information Read this operator's manual carefully before using. Failure to understand and follow the contents of this manual may result in electrical shock, fire and/or severe personal injury. FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2.
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
