SDS

UX 2.0 Panels
SECTION 8 EXPOSURE CONTROLS AND PERSONAL PROTECTION
Measures: include process or personnel enclosure, mechanical ventilation (local
exhaust), and control of process conditions.
Respiratory Protection: A NIOSH certified respirator or dust respirator may be used under conditions
where airborne concentrations are expected to exceed exposure limits.
Hand Protection: Not required under normal conditions of use.
Eye Protection: Not required under normal conditions of use. If dusts or particulates are
created in the process of installation, approved eye protection (safety
glasses with side-shields or goggles) to safeguard against potential eye
contact, irritation, or injury is recommended.
Body Protection: Not required under normal conditions of use.
SECTION 9 PHYSICAL AND CHEMICAL PROPERTIES
Physical State: Solid article
Color: White with black inset strips
Odor: Odorless to faint
Odor Threshold: Not available.
pH: Not available.
Melting Point/Range (ºC/ºF): > 60ºC / 140ºF
Boiling Point/Range (ºC/ºF): Not applicable.
Flash Point (PMCC) (ºC/ºF): Not flammable
Evaporation Rate: Not applicable.
Flammability / Explosivity Limits in Air (%): Not applicable.
Vapor Pressure: Negligible.
Vapor Density (Air = 1): Not applicable.
Relative Density: Not applicable.
Solubility in Water: Insoluble.
Partition Coefficient: Not available.
Autoignition Temperature (ºC/ºF): Not available.
Decomposition Temperature (ºC/ºF): Not available.
Viscosity: Not applicable.
Explosive Properties: None.
Oxidizing Properties: None.
Volatile Organic Content (VOC) (g/l): ca. 0 g/l (as defined by 40CFR51.100)
SECTION 10 STABILITY AND REACTIVITY
Reactivity: Product will not undergo additional reaction.
Stability: Stable under normal storage conditions.
Hazardous Polymerization: Will not occur.
Conditions to Avoid: Contact with incompatible materials, excessive heat, sources of
ignition.
Revision Date: September 27, 2017 Page 3 of 7