Installation Instructions

Wiring Chases
Run vertically at 16" on center and horizontally
on top of the panel; provides easy access for
running wire without the need for protective
plates per National Electric Code - NEC Article
330-4d, 300-41a
* designed for use with Romex® (NM sheathed wire), MC
Flex, AC Flex, or rigid metal conduit
Attachment Stud Face
The 1½" wide face provides solid attachment
for drywall with the equivalent holding power of
20 gauge commercial steel studs.
* faces are not visibile on EX 2.5 panels, they are covered by
½" of extra insulation.
Dovetailed Gluing Surface
Adhesive is formed into locking dovetails
providing a strong mechanical lock to the wall
* a single bead of adhesive can provide a strength equiva-
lent to mechanical fasteners spaced 6" apart
Drainage Plane
This feature provides valuable protection to
drain water and keep your drywall dry if a leak
or crack occurs
* drainage planes are built into both front and back
surfaces of EX 2.5 panels
Foam Insulation
High density injection molded closed-cell
polystyrene (EPS) insulation
* it can easily be cut‚ carved or grooved with a simple utility
knife to fit any obstacle or protrusion
Attachment Stud
Strong reinforced composite studs are cast into
the insulation; a much more durable alternative to
wood framing as it won’t warp, bow, twist, shrink,
mold, rot, or decay
* studs can easily be cut with a hand or power saw
Cutting/Channel Line
Located 16” on center indicating the location of
vertical wiring chases; also serves as a cutting
guide to maintain offset interlock pattern during
installation
Recessed Attachment Points
Provide an alternate method of panel attachment
that keeps the heads of mechanical fasteners
below the surface of the UX panel
Tongue and Groove
This interlock keeps panels flush and flat; the
self-flashing design eliminates the need to tape
seams
Foam Insulation
H
igh density injection molded closed
polystyrene (EPS) insulation
* it can easily be cut‚ carved or grooved with a simple utility
knife to fit any obstacle or protrusion
Attachment Stud
Strong reinforced composite
studs are cast into
the insulation
;
a much more durable alternative to
wood framing
as it won’t
warp
,
bow
,
twist
,
shrink
mold
,
rot
,
or decay
*
studs can easily be cut with a hand or power saw