User's Guide

27
shock. If the device is shocked, immediately
turn it o, disconnect the charging cord from
the power outlet (if charging) and contact
Insituware at support.insituware.com.
Do not place the device on an unstable
surface.
If the device should be dropped and/or
broken, it could result in an injury, and
continued use could result in re or electrical
shock.
• Do not place the device on an unstable,
slanted, or vibrating surface such as a wobbly
or inclined stand.
Use only the correct power cord and the
correct power outlet.
Incorrect power supply could result in re or
electrical shock.
• Use only charging devices approved by
Insituware. Inistuware accessories are
designed for your device to maximize battery
life.
• Using other accessories may invalidate your
warranty and may cause damage.
Be cautious of the charging cord
connection.
Incorrect connection of the power cord could
result in re or electrical shock.
• Do not touch the charging cord with a wet
hand.
• Check that the connecting portion of the
charging cord is clean (with no dust), before
using. Use a soft and dry cloth to clean the
power plug.
• Insert the power plug into a power outlet
rmly. Avoid using a loose, unsound outlet to
prevent contact failure.
Avoid extreme temperature environments.
The heat or cold could have adverse inuence
on the device. Do not place the device, or
other accessories near a hot object such as
heater, or cold objects such as a refrigerator,
etc.
Body worn operations.
For body worn operations, this Vision MARK-
1 has been tested and meets the FCC &
ISED RF exposure guidelines for use with an
accessory that contains no metal and the
positions the Vision MARK-1 a minimum of 0
cm from the body. Use of other accessories
may not ensure compliance with FCC & ISED
RF exposure guidelines. The highest SAR value
for the Vision MARK-1 as reported to the FCC
and ISED when tested for use at the body is
0.774W/kg and 0.907W/kg.
Proper Disposal
This product contains a 5000 mAh Lithium
Polymer battery; do not put in trash. Dispose
of in accordance with environmental laws.
For product disposal, contact your local
government agency or www.eiae.org (in the
US) or www.epsc.ca (in Canada).
For more information, contact Insituware.