Specification

10-7/8"
6-1/8"
6-3/4"
High Performance Steaming Hot Water Tank
Stainless Steel Tank dispenses
near-boiling 210°F (99°C) water instantly
Water dispenser and filtration sold separately
Model
HWT-HP
Submittal Sheet
Job Specifications
Specifications
Instant Hot Water Dispensers
HWD490-16C-83-10
Dimensions
• 1300 watt heating element for
rapid recovery
• Electronic thermostat with ± 2°F (± 1°C)
tight temperature control
• Provides 100 cups/hour of 210°F (99°C)
near-boiling water
• 2/3-gallon stainless steel tank
• Easy to adjust temperature control
• Tool-free tank connections and dry start
protection to ease installation
• 115 volts, 1300 watts, 11.3 amps
• For use with InSinkErator or authorized
OEM instant hot water dispensers
(excluding model Hot1 and Hot100)
• Residential model
• Unit not for commercial/industrial use
Capacity
Thermostat
2/3-gallon stainless
steel tank dispenses
100 cups of 210°F (99°C)
water per hour
Electrical 115 volts, A.C., 1300
watts, 11.3 amp
heating element
with grounded
three (3) prong plug
Insulation
Recommended
Supply Pressure
Shipping Weight Approximately
5.7 lbs.
25-125 psi
Meets U.L. 94HF-1
flammability
specification
Electronic, adjustable
from 190°F to 210°F
(88-99°C) (factory
pre-set at 205°F, 96°C)
Sample Specification
Instant hot water dispenser(s) shall be
equipped with an InSinkErator Model HWT-HP
stainless steel tank with adjustable
temperature from 190°F to 210°F (88-99°C).
We Come To You
®
3-Year In-Home
Limited Warranty*
* The complete InSinkErator warranty is included in the Care & Use
booklet packed with each unit.
US Pat. D532,497 (tank enclosure)
Chosen by Professional
Coffee Shops for
Proven Performance
Printed in USA
1-800-558-5700
USA
Canada
www.insinkerator.com
1-800-558-5700
www.insinkerator.ca
The Emerson logo is a trademark
and a service mark of Emerson Electric Co.
InSinkErator may make improvements and/or changes
in the specifications at any time, in its sole discretion,
without notice or obligation and further reserves the
right to change or discontinue models.
© 2016 InSinkErator, InSinkErator
®
is a business
unit of Emerson Electric Co. All Rights Reserved.
Certified to
NSF/ANSI 372
≤ 0.25% lead