Installation Guide

Property Damage: Do not extend the copper
lines farther than the 16" provided.
1
2
3
Brass Nut
Ferrule
Brass Insert
Wing Nut
Plug
Fiber
Washer
Brass Nut
Ferrule
Wing Nut
Fiber
Washer
1
2
3
Brass Nut
Ferrule
Brass Insert
Wing Nut
Plug
Fiber
Washer
Brass Nut
Ferrule
Wing Nut
Fiber
Washer
1
2
3
Brass Nut
Ferrule
Brass Insert
Wing Nut
Plug
Fiber
Washer
Brass Nut
Ferrule
Wing Nut
Fiber
Washer
Personal Injury: Do not locate filter above an outlet or other
electrical device. Install head and bracket so that connections
require no stretching, kinking or pinching of tubing.
It is normal for approximately 2 oz. of water to
discharge when filter is removed.
Property Damage: Tube runs need to form to the cabinet’s
contours to allow storage space with no sharp bends. Tubes
need clean, perpendicular, burr-free cuts to ensure a true fit.
INSTALLING FILTRATION
A
B
1
2
3
Brass Nut
Ferrule
Brass Insert
Wing Nut
Plug
Fiber
Washer
Brass Nut
Ferrule
Wing Nut
Fiber
Washer
nn
Determine length of tubing required,
then cut to length making sure the
cut is perpendicular and burr-free.
nn
Insert a white 3/8" tube into inlet
side of filter head
until it stops.
Press in again to ensure a secure fit.
nn
Insert the other white 3/8" tube
into outlet side of filter head
until it stops.
Press in again to
ensure a secure fit.
nn
Mark hole locations for filter head
and bracket in a spot that allows for
filter replacement.
nn
Drill 1/8" starter holes and attach
bracket to wall with wood screws,
turning until snug.
nn
Remove red filter cap, insert filter
cartridge into filter head and twist
clockwise until “LOCK” arrow on the
filter aligns with arrow on bracket.
1
2
3
Brass Nut
Ferrule
Brass Insert
Wing Nut
Plug
Fiber
Washer
Brass Nut
Ferrule
Wing Nut
Fiber
Washer
nn
To redirect filter replacement water
discharge, place 6" clear tube over
vent hole on the left side of filter head.
C
nn
Insert the copper tube(s) from the
dispenser into the 3/8" to 1/4"
quick-connect fitting.
nn
Connect the white 3/8" tube
from the right outlet on the filter
head into the quick-connect fitting
until it stops.
Press in again to
ensure a secure fit.
Filtration standard with HC1100 & GN1100
Available as an option for all other models
from water
supply line
to dispenser
To remove tube(s) or plug from quick-connector,
depress the release ring and gently pull away.
Discharge
tube
From water
supply line
To faucet
From filter or
water supply line
GN1100/GN
H-Wave/H-View
H990/H770
From filter or
water supply line
D
13
HC1100/HC
HC-Wave/HC-View
1
2
3
Brass Nut
Ferrule
Brass Insert
Wing Nut
Plug
Fiber
Washer
Brass Nut
Ferrule
Wing Nut
Fiber
Washer
1
2
3
Brass Nut
Ferrule
Brass Insert
Wing Nut
Plug
Fiber
Washer
Brass Nut
Ferrule
Wing Nut
Fiber
Washer