43386 Filter Owner's Manual.
43386 Filter Owner's Manual.qxd 9/26/02 11:58 AM Page 3 Greg Leber Jobs:39237 ISE HWD Owner's Manual:43386 HWD Filter Installing the In-Sink-Erator Filter System 1. Mount the Head & Filter Bracket Install the head and bracket assembly so that all plumbing connections can be made without stretching, kinking, or pinching the 3/8" polyethylene tubes.The tubes can be cut to make installation easier. Make sure the mounting location allows for the filter cartridge to be removed and replaced.
43386 Filter Owner's Manual.qxd 9/26/02 11:58 AM Page 6 Greg Leber Jobs:39237 ISE HWD Owner's Manual:43386 HWD Filter 3. Make Plumbing Connections ( continued) Completely insert 3/8" polyethylene tubing from the outlet side of filter head into the 3/8" to 1/4" divider ("Y" quick-connect fitting).This divider allows the system to supply one or two plumbing fixtures with filtered water.
3386 Filter Owner's Manual.qxd 9/26/02 11:58 AM Page 7 Greg Leber Jobs:39237 ISE HWD Owner's Manual:43386 HWD Filter F201 Chemical & Mechanical Reduction Filter Specifications: (Use replacement cartridge F-201R) This cartridge (included with the system) provides mechanical and chemical reduction of dirt/rust, taste/odor, chlorine and particulates. System is tested and certified by NSF International against ANSI/NSF Standard 42 for the reduction of Particulate Class I, Chlorine Class I, Taste and Odor.
43386 Filter Owner's Manual.qxd 9/26/02 11:58 AM Page 4 Greg Leber Jobs:39237 ISE HWD Owner's Manual:43386 HWD Filter REMEMBER! Replace your filter regularly with only genuine In-Sink-Erator® Filter Cartridges F-201R for reduced chlorine taste and odor F-501R for better tasting and healthier water ...replace every 3 months ...replace every 6 months ice Lasts Twg! as Lon To replace filter cartridges, call the In-Sink-Erator Answerline, or visit our website at www.insinkerator.com.
43386 Filter Owner's Manual.
